Products & Services
Indexable Parting Off Tools



Dormer's indexable inserts are manufactured in cobalt alloyed High Speed Steel and are available either in bright finish, with TiN coating or with TiAlN coating.

The sides of the inserts are hollow ground, which means that the clearance will be correct radially as well as axially.

A chipbreaker has been shaped in the cutting surface of the edge in order to obtain the best possible type of chips when working in long-chipping materials.



TiAlN is harder than TiN and can withstand higher temperatures.

Dimensions


Indexable inserts are available in two sizes with straight edges and with 8º and 15º lead angle in both left hand and a right hand version. Tools for standard retaining ring size grooves, with widths of 1.1, 1.3, 1.6, 1.85 and 2.15 mm, are also available.

Recommendations


Indexable parting off
tools are recommended for use on steels up to
a tensile strength of
1200N/mm2, Stainless Steel, Copper, Brass, Aluminium and its
alloys.
Feed in mm/revolution
Feed Group
Insert size
23mm
Insert size
40 mm
A
0,20
0,25
B
0,15
0,20
C
0,10
0,15
D
0,05
0,10
E
0,03
0,05

© Sandvik ABLatest update: 07/18/2007 11:32:55 AM

| Comment this page